Skip to main content
Help
Editing Step 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Next we will cover a moderately difficult soldering application. In our case, we will be soldering very thin and delicate leads to a circuit board with small solder pads.

Small electronic components, including wires, cannot dissipate heat as quickly as larger components. This makes them very susceptible to overheating. Make sure to heat the connection just long enough to melt the solder.

The leads were removed from the solder pads by heating the joint on the top side of the board, while pulling out the leads with a pair of tweezers.

Your contributions are licensed under the open source Creative Commons license.