Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

The logic board is still connected to the front case by the display ribbon cable, located on the headphone jack side of the logic board.

Lift the logic board assembly out of the front case from the click wheel connector side (the cable you just disconnected). Rotate the logic board assembly about the display ribbon cable and lay it next to the front case.

Your contributions are licensed under the open source Creative Commons license.