Skip to main content
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Open the display connector by lifting on the brown latch with a plastic opening tool or a finger until it is in a vertical position.

Failing to do this correctly could result in damage to the cable and/or connector.

Gently pull on the display ribbon cable and it should easily slide out of the connecter.

If the connector is properly open, disconnecting the ribbon cable should require little to no force.

Your contributions are licensed under the open source Creative Commons license.