Skip to main content
Help
Editing Step 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

The cable you're about to remove is very fragile - do not pull directly on the wires. Instead, try to pry up the connector directly, using a spudger or a small flathead screwdriver if necessary.

Disconnect the microphone cable at the front of the computer, between the left side of the hard drive and the metal framework.

Deroute the microphone and display data cables from the metal framework, removing tape as necessary.

Your contributions are licensed under the open source Creative Commons license.