Editing Step 2 —

Step Type:

Drag to rearrange

Fill the dent, gap or crack with the body filler and hardener mix. You can use paper, tape or your hands to smooth out the filler while it is still in putty form.

It is recommended that you apply several thinner layers of filler to deep dents and cracks to prevent having a porous finish.

It is recommended that you wipe off excess Bondo and smooth out the Bondo as much as possible before it dries to minimize the sanding required.

Once the Bondo has fully dried, typically around 20-30 minutes, sand the area so that it to the desired contour.

If the Bondo you bought isn't the color you want, follow our hand-painting guide to help match the color of your part.

Your contributions are licensed under the open source Creative Commons license.