Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

Step Type:

Drag to rearrange

Remove the two 3 mm Phillips screws inside the left edge of the battery tray.

Three 3 mm Phillips around the battery compartment.

Three 4.5 mm Phillips along the optical drive bezel. (a magnetic screwdriver may help to lift these screws out)

One 12 mm Phillips in the lower right corner.

Four 14.5 mm Phillips.

Your contributions are licensed under the open source Creative Commons license.