Skip to main content
Help
Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

To disconnect the cable, use the fine tweezers to flip up the small retaining flap. Then, you can safely pull the ribbon cable out.

Be sure you are prying up on the hinged retaining flap, not the connector itself.

The zero insertion force (ZIF) connector is used to secure delicate ribbon cables, such as this trackpad cable.

Your contributions are licensed under the open source Creative Commons license.