Skip to main content
Help
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Starting at a bottom corner, use the spudger to separate the rear case from the front display.

Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.

Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.

Your contributions are licensed under the open source Creative Commons license.