Help

Editing Step 10 — Add a title

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Lift up the left side of the logic board and disconnect the gray and black power cable from the bottom of the board.

Pull the power cable connector parallel to the face of the logic board.

Grasp the logic board at the left side and at the thin section, and rotate the logic board out of the lower case.

To properly reassemble your MacBook Pro, you'll have to clean off and replace the old thermal compound from the chips on the back of the logic board. Use our Applying Thermal Paste Guide to prepare the processor and heat sink surfaces.

Your contributions are licensed under the open source Creative Commons license.