Skip to main content
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Using a Phillips #2 Screwdriver, remove the 3 screws located on the back of the fan cage.

Next, loosen the screw located on the bottom of the fan.

The bottom screw does not need to be removed, but only loosened about 3 or 4 turns.

The front of the fan's cage is now able to be removed by prying the front away from the back.

Your contributions are licensed under the open source Creative Commons license.