Skip to main content
Help
Editing Step 11 —

Step Type:

Drag to rearrange

Since this particular oxygen sensor can be used on many vehicles, the cable is a bit too long for this particular vehicle.

If the cable has too much slack, it may contact the hot manifolds/exhaust pipes and the wire insulation can melt. All kinds of bad can result from that, so follow the next two bullets.

Luckily, Bosch is awesome and includes two zip ties to keep the cable folded on itself to take up any slack.

Fold the cable on itself and use zip ties to keep it folded. Trim the ends of the zip ties if you desire.

Your contributions are licensed under the open source Creative Commons license.