Skip to main content
Editing Step 6 —

Step Type:

Drag to rearrange

Next, locate your new sensor. You remembered to buy it, right?

Before reading the next bullet, read this one. The threads of this oxygen sensor come with anti-seize goop pre-applied. As you remove the protective cap, don't get any anti-seize on the tip of the oxygen sensor. Don't touch it either. It'll mess up the readings from the sensor if the anti-seize or other junk is vaporized in the hot exhaust gas stream.

Carefully remove the protective plastic cap from the tip of the sensor.

Your contributions are licensed under the open source Creative Commons license.