Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 27 guides that include this step.

Step Type:

Drag to rearrange

Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

Repeat this step with the other adhesive strip and remove it.

If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Your contributions are licensed under the open source Creative Commons license.