Skip to main content
Help
Editing Step 1 —

Step Type:

Drag to rearrange

Please note that if all you are trying to do is manually eject a game and not make repairs to the drive, step 14 is the ONLY required step. It is NOT necessary to remove the drives casing, just push the tray in when you're done.

Start by removing the 4 screws on the bottom of the drives case using a Philips #0. There are different variations of the drive and some have Torx screws instead of Philips. Use the necessary tool for the specific version that you have.

Once screws are removed, lift the bottom half of the case up and away from the drive.

Flip the drive over and remove the top half of the drives case.

Your contributions are licensed under the open source Creative Commons license.