Skip to main content
Editing Step 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Be careful when flipping up the logic board. The headphone jack and docking port are attached to the board.

Gently lift the logic board (and attached components) upward.

The smaller portion of the logic board that resides underneath is very bendable and frail. Make sure not to pull the spudger upward when using it to detach the small board. Use only side-to-side movement.

Slide the spudger under the small portion of the logic board. The board should come loose once the spudger has slid almost all the way to the other side.

Your contributions are licensed under the open source Creative Commons license.