Skip to main content
Help
Editing Step 14 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

Step Type:

Drag to rearrange

Remove the following four screws:

One 9.3 mm T10 coarse-threaded screw

One 25 mm T10 coarse-threaded screw

Two 22 mm fine-threaded screws

Pull the upper right and lower left corners of the power supply away from the rear case to dislodge the mounting posts attached to the power supply's corners.

Your contributions are licensed under the open source Creative Commons license.