Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Locate the copper leads connecting the stator to the bridge assembly. There are 3 sets of 2 leads on the perimeter of the bridge, making 6 leads total.

These leads must be cut in order to remove the bridge from the alternator. These leads will have to be soldered back together on reassembly. Keep the cut as clean as possible.

Use wire cutters to cut all 6 of the leads on the perimeter of the bridge.

Your contributions are licensed under the open source Creative Commons license.