Skip to main content
Help
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

Step Type:

Drag to rearrange

The display data cable plug has a wire lock. Disengage the plug's lock by rotating the plastic tab so that it points upward. (It is not a pull tab.)

Pull the display data cable straight out of its socket on the logic board.

Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

Your contributions are licensed under the open source Creative Commons license.