Skip to main content
Help
Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Remove the following five screws securing the heat sink to the logic board:

Four 6.4 mm T8 Torx screws

One 4.3 mm T10 Torx screw

It may be necessary to hold the socket with a Phillips screwdriver on one side of the board while you unscrew the Torx screw on the other side of the board.

Your contributions are licensed under the open source Creative Commons license.