Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

After removing the propellers, unscrew all 4 (3x3mm) screws connecting the electronics to the frame.

Once all of the screws holding the plastic dust cover to the frame are removed, pull the 2 LED bars through the dust cover and remove the thin plastic dust cover from the drone.

As the piece connecting the electronics to the drone cover are accessible, keep note to not remove electronics until after disconnecting the drone head lamp first.

Your contributions are licensed under the open source Creative Commons license.