Skip to main content
Help
Editing Step 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Next, reinstall the four 1.2 mm Phillips screws along the inner edge of the trackpad.

Tighten the screws all the way, then back them out about 1/4 turn.

Check the alignment of the trackpad on the keyboard side of the upper case. Once you have centered the trackpad in the upper case, tighten the four Phillips screws all the way.

Your contributions are licensed under the open source Creative Commons license.