Skip to main content
Help
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Use the flat end of a spudger or your fingernail to flip up the retaining flap on the lower LCD power ribbon cable ZIF socket.

Be sure you are prying up on the hinged retaining flap, not the socket itself.

Pull the ribbon cable out of the connector with a pair of tweezers.

Grasp the ribbon cable as close to the connector as possible with the tweezers to avoid tearing it.

Your contributions are licensed under the open source Creative Commons license.