Skip to main content
Editing Step 14 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Remove the 8.6 mm Phillips screw securing the antenna/camera cable retainer to the top left portion of the upper case.

Remove the antenna/camera cable retainer from the upper case.

Check your new part: The antenna cable and plate attached to the upper case may need to be transferred. Take care peeling the metal plate off, an adhesive is used to hold it in place.

Your contributions are licensed under the open source Creative Commons license.