Skip to main content
Help
Editing Step 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Gently flip the PCB over 180deg so it is off the aluminum back panel.

Be CAREFUL not to damage the 8 flex cables

The PCB may be attached to the aluminium by some adhesive near the LVDS connector. IF so use a plastic pry tool or spudger to GENTLY lift the PCB up

Now lift the the back panel off the LCD separating the LCD from the back light assembly

Your contributions are licensed under the open source Creative Commons license.