Skip to main content
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Remove the following 4 screws:

Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear case. Note the order in which you remove the screws, as the left one has a slightly larger head.

One 3.8 mm Phillips #00 screw in the plastic loop near the headphone jack.

Your contributions are licensed under the open source Creative Commons license.