Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 14 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Use a spudger to gently pry up the end of the logic board closest to the dock connector.

There is a small golden grounding tab on the logic board adjacent to the 'Do not remove' sticker. Be very careful this does not snag on the side of the case when prying up the logic board; it breaks easily! If you have signal problems after removing the logic board, check this ground tab.

If the board won't lift up, double check to make sure all 8 screws securing the logic board have been removed.

Your contributions are licensed under the open source Creative Commons license.