Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Now that the display is out, remove the aluminum shield off the motherboard.

Unscrew the single 4mm screw located on the top using a T4 Torx bit.

After screw is out, gently remove the aluminum shield off the motherboard.

Working on a magnet board is recommended as the screws are small and can be easily misplaced.

Your contributions are licensed under the open source Creative Commons license.