Skip to main content
Help
Editing Step 13 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Pull the display data cable straight out of its socket on the logic board.

Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

Do not touch the contacts on the data connector or its socket with your fingers or any tools, as you may deposit oils or damage the pins.

Gently bend the display data cable toward the display hinge, to expose the screws on the MagSafe 2 board.

Your contributions are licensed under the open source Creative Commons license.