Skip to main content
Help
Editing Step 22 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Take the broad, flat side of the metal spudger and push the clip down, taking care not to tear the thin metal rail from the rear panel. Alternatively a pair of flat pin nosed pliers can be used to reduce risk of slipping and damaging the headphone jack.

Be careful not to damage any of the headphone jack parts while shaping these clips!

Your contributions are licensed under the open source Creative Commons license.