Skip to main content
Help
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Note: It is recommended that step 3 and step 4 be completed simultaneously. The tabs are identical just on opposite sides.

Viewing from the front of the printer, there is a tab in the lower left corner.

Viewing the tab hole from the bottom of the printer.

Insert the mini screwdriver into the marked hole and pry out the tab.

Push in towards the blue sticker of the printer while pulling up on the case at the same time. Use one of the tools to keep the tab pried open.

This tab is the easiest to break so be very careful.

Your contributions are licensed under the open source Creative Commons license.