Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

These three are the easiest tabs to remove. They are located on the back side of the printer.

Push the tab in with one of the plastic opening tools.

Keep the tab pushed in by leveraging the tool between the tab and the hole. Pull up on the case so that the tab doesn't lock back into place.

Repeat this process with the furthermost right tab, then proceed with the middle tab.

Your contributions are licensed under the open source Creative Commons license.