Skip to main content
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

Step Type:

Drag to rearrange

Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board, and bend them up and out of the way.

The cable connection points are very fragile. Be careful to lift only on the connector, and not on the socket or cable.

To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

Your contributions are licensed under the open source Creative Commons license.