Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 18 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Release the plastic locking tab of the upper ribbon cable with the plastic spudger.

Pull the top ribbon cable from its mount with the fine tip metal tweezers.

Remove the bottom ribbon cable with the fine tip metal tweezers by pulling it toward the flash switch side of the camera.

The bottom ribbon cable does not have a locking tab; it simply slides in and out.

Your contributions are licensed under the open source Creative Commons license.