Skip to main content
Help
Editing Step 22 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Use the plastic spudger to remove the ribbon cable from the motherboard by placing the spudger under the ribbon cable connector and pulling up.

Remove the 2.8mm screw from the motherboard.

Do not try to remove the motherboard from the camera yet.

Carefully rotate the motherboard upward.

Use the plastic spudger to remove the ribbon cable from the bottom of the motherboard by placing the spudger under the ribbon cable connector and pulling up.

Your contributions are licensed under the open source Creative Commons license.