Skip to main content
Help
Editing Step 42 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Reinsert the opening pick under the Lightning connector ribbon cable from the case-side edge.

Slide the pick along the Lightning connector ribbon cable and under the logic board.

Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable.

Leave the pick under the Lightning connector cable to keep the adhesive separated.

Your contributions are licensed under the open source Creative Commons license.