Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 15 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Be careful not to pinch the cable while pulling it out because it can easily be damaged. It is helpful to pull it out by the tabs that are built into the connector ribbon.

Make sure to pull the cable ribbon straight out and not up because pulling it up may harm the connector.

Remove the small cable towards the top by pulling it straight out of its connector using tweezers or your fingers.

Remove both Screws on the bottom side of the motherboard

Your contributions are licensed under the open source Creative Commons license.