Skip to main content
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 26 guides that include this step.

Step Type:

Drag to rearrange

Turn the computer over and open it up.

Remove the following 14 screws:

Six 2.5 mm Phillips on either side of the keyboard area.

Five 4.5 mm Phillips on the left half of the keyboard area.

One 7 mm hex in the upper left corner of the upper case (a T6 Torx driver will do the job nicely).

One 15 mm Phillips in the upper middle of the keyboard area.

One 16.5 mm hex in the upper right of the upper case (again, a T6 Torx driver will work well).

Your contributions are licensed under the open source Creative Commons license.