Skip to main content
Help

Step Type:

Drag to rearrange

Please be very careful!, This glass shatters easily and shards will go flying if you are rough

The glass is connected to the frame and LCD by the world's strongest adhesive, .... took me well over an hour to remove the old screen

Using a heat gun (high powered blow dryer) or those of you lucky enough to have an iopener kit slowly heat your way around the glass, start in a corner and work your spudger in.

Make sure you slide your spudger straight in to avoid the lcd There is a nice gap but the adhesive is two part!

Your contributions are licensed under the open source Creative Commons license.