Skip to main content
Help
Editing Step 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

Step Type:

Drag to rearrange

Remove the following 2 screws from the right hinge mount:

One 6 mm Phillips on the left side of the hinge mount.

One 10 mm Phillips on the right side of the hinge mount.

For Santa Rosa/Penryn models, see second picture and remove:

One 3 mm smalller diameter Phillips on the far left.

One 5.2 mm larger diameter 4.2 mm head Phillips in the middle.

One 10 mm Phillips from the far right.

Lift the right hinge mount with the small plastic piece out of the computer.

Your contributions are licensed under the open source Creative Commons license.