Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Remove the single short black Torx screw anchoring the metal framework to the lower casing.

Use a five millimeter nut driver or needle-nose pliers to remove the small metal nut from the bolt in the laptop's back left corner.

If you're using pliers, be extremely careful not to let them slip or you may damage the logic board.

Your contributions are licensed under the open source Creative Commons license.