Help
Editing Step 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Tilt the core towards the front while lifting from the back.

If the core is proving difficult to remove, a wire might be caught somewhere, likely near the water pump. We recommend shaking slightly as you lift since the frothing tube is at an odd angle.

We also recommend that you remove the valve before removing the core so that there is less obstructing movement. But the core can be removed without removing the valve.

Your contributions are licensed under the open source Creative Commons license.