Skip to main content
Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Before prying up on the cover, you may have to first remove a screw located inside the battery compartment (M2X3) and release the two latches. If you don't release the latches, you may snap the cover.

Pry up the top of the cover first by using a spudger to wedge in between the cover and base of the computer.

Once the spudger is between the cover and the base of the computer, wedge underneath the remaining border surrounding the keyboard.

Cracking sounds are normal. Be careful and take your time removing this panel.

Your contributions are licensed under the open source Creative Commons license.