Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Insert a plastic opening tool in the small crevasse between the screen and the back.

Pry the screen away from the back panel.

Repeat this on each edge of the device.

We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.

This requires heavy force. The back of the device is attached with adhesive. If the back panel is too hard to remove, use the iOpener.

Your contributions are licensed under the open source Creative Commons license.