Skip to main content
Editing Step 15 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Continue derouting the cellular antenna cable from the second and third logic board clips.

Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip.

Don't try to remove it by pulling on the cable, as it will tear easily.

In order for the cable to reach its socket on the logic board, you must route it above the logic board and underneath the audio control flex cable, as shown in the first photo.

Your contributions are licensed under the open source Creative Commons license.