Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive.

Transfer the hard drive retaining posts to your new hard drive.

If desired, transfer the pull tab over to your new hard drive.

If you are installing a new hard drive, we have an OS X install guide to get you up and running.

If you upgraded your EFI Firmware ROM you can also perform an internet recovery.

Your contributions are licensed under the open source Creative Commons license.