Skip to main content
Help
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Place the screws on the magnetic mat to avoid losing them.

Use a 3.0 Phillip’s head screwdriver to remove the 10 1.2mm Phillip’s head screws in the plastic frame that held the motherboard and battery.

Use a 3.0 Phillip’s head screwdriver to remove the 3 0.5mm Phillip’s head screws in the plastic frame that held the motherboard and battery.

Use the small plastic opening tool and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.

Your contributions are licensed under the open source Creative Commons license.