Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Start by removing the silver plastic face from the camera using a plastic opening tool. Insert the plastic opening tool into the middle of each edge and lift up the tabs that keep the camera face on.

The seven plastic tab locations are marked in red.

Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the camera face off, but found that it did not give us enough leverage.

There may be glue holding the camera face on to the housing. Be careful not to flex the camera face too much, or it will crack.

Your contributions are licensed under the open source Creative Commons license.