Skip to main content
Help
Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

To remove the sensor assembly, simply peel off the lens towards the attached ribbon cable.

The sensor has ribbon cables running to the motherboard via a black rectangular connector.

To remove the sensor, use the spudger to pry up each side, Then, lift the connector straight up from its socket.

With the old camera sensor assembly removed, you can now replace it with a new sensor.

Your contributions are licensed under the open source Creative Commons license.