Skip to main content
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Remove the thirteen 6 mm Torx T8 screws.

Some screws have plastic covers over them that need to be pried out before the screws can be removed.

Remove the five Torx M2.5x5 screws.

Remove the single 7 mm Phillips #1 screw.

Loosen the two Phillips #1 screws. These screws will remain captive to the device.

Your contributions are licensed under the open source Creative Commons license.