Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Using the flat metal spudger and curved metal spudger, make a wedge between the plastic back cover and the inner frame

Using the second spudger, slowly work your way around the perimeter of the device

Check for clicking sounds as you are prying the back cover away from the frame

As the back cover is almost completely removed, use the suction-cup tool to remove the plastic cover without damaging the back

Your contributions are licensed under the open source Creative Commons license.